#arpnetworks 2015-10-12,Mon

↑back Search ←Prev date Next date→ Show only urls(Click on time to select a line by its url)

WhoWhatWhen
***s10g has quit IRC (Quit: leaving) [01:57]
................................. (idle for 2h40mn)
jcv_ has quit IRC (Quit: leaving)
jcv has joined #arpnetworks
[04:37]
_iwc has joined #arpnetworks [04:46]
_iwc has quit IRC (K-Lined) [04:59]
...................................................................... (idle for 5h48mn)
avj has joined #arpnetworks [10:47]
avjanyone else by chance on kvr26? i initiated a reboot from within the VM, and not only did it not come back but i can't connect to the remote serial console or vnc over ssh (which i've used many times before)
i've tried a hard shutdown and power-on, but nothin'
[10:56]
i did submit a proper support request as well, just figured i'd pop in here too [11:06]
lyarickavj: did you shutdown through the web interface or over the ssh console? [11:06]
avjmy initial reboot was initialized from a vnc-over-ssh session from the VM itself
and from there the vnc session crapped out, and i figured something got hosed in there
so i initiated a hard shutdown from the ssh console session
[11:08]
lyaricki've seen issues via the web interface.. console almost always works.
maybe try to boot again via the console?
AFAIK, hard shutdown will make it not respond to VNC
[11:16]
avjyeah, i tried that a few times. attempted initiating a boot, but not only does the VM never come up, i also cannot reconnect to the console in any way [11:29]
.... (idle for 16mn)
grodyjust try to start it back and keep hitting up VNC - it should at least get to a 'post' stage on the vBIOS
not seen or had that issue myself
well, when i broke my kernel config - but was able to get in via VNC and fix
[11:45]
avjno dice, i've tried that several times already [11:50]
BryceBotThat's what she said!! [11:50]
grodyBryceBot, no [11:50]
BryceBotOh, okay... I'm sorry. 'no dice, i've tried that several times already' [11:50]
grodythat blows :( [11:51]
avjit's as if the boot is failing
and of course, by that i mean the VM startup, not the OS boot
[11:51]
grodyi think once, it took a little over a minute for any of the portal buttons to work once
but that was ages ago
but the console access yea..
KB just suggest power off if shutdown doesn't work, wait 60 seconds, power up, wait 60 seconds.. repeat if doesn't work
but it sounds like thats what you have been doing
[11:54]
avjcertainly not at that frequency, but i've tried probably about 10-15 times over the last couple of hours [12:00]
...................... (idle for 1h48mn)
up_the_irons: ding ding [13:48]
...... (idle for 27mn)
up_the_ironsavj: I'll take a look at that shortly [14:15]
avjhey, sweet. thank you. [14:16]
............ (idle for 55mn)
up_the_irons: mercutio just grabbed my ticket from earlier. looks like it was a kvm hiccup. all is well now. thanks. [15:11]
up_the_ironsavj: yeah we worked on it a bit together. glad all's good now! [15:14]
avjoh, nice. was this a fairly atypical failure mode or something more common? [15:16]
mercutioatypical. [15:18]
hmm php7 seems to be coming out in a month's time.
i am curious how quickly people will shift to it, it's meant to give around 2x speed improvement.
but historically a lot of people have kept using old php versions.
[15:24]
brycecI can count the number of PHP6 installs/users I know on my non-existent tail. [15:37]
mercutiophp6 was skipped [15:38]
brycecgood point [15:38]
mercutiolots of people are using 5.3/5.4 though [15:38]
brycec(Last time i was paying attention to such things, PHP 6 was still going to be a thing.) [15:38]
mercutioand there's still 5.2
hmm www.php.net doesn't work
[15:38]
brycecworks for me [15:39]
mercutioinvalid cert here
oh without https it works
[15:39]
brycecyou didn't say you were trying https... why are you trying https? :p [15:39]
mercutioyeh it's up to 5.6
everything is https now
i dunno
[15:39]
brycecbtw it's secure.php.net [15:39]
mercutiogoogle links to https [15:39]
brycec(I hit https://php.net and was bounced to secure.php.net)
...you googled php.net? lol
[15:40]
mercutioi think i googled php [15:40]
brycecI hit https://www.php.net too and was bounced to secure.php.net [15:40]
mercutioyou're right, https://php.net redirects to secure.php.net
and works.
php.net and www.php.net give different ipv4 addresses
but they give the same ipv6 address.
[15:40]
brycec* Connected to www.php.net (2a02:cb41::7) port 443 (#0)
:P
[15:41]
mercutioheh
anyway, php 5.6 is current
http://w3techs.com/technologies/details/pl-php/5/all

and this suggests that php 5.3 is the most common version
[15:41]
brycecphp.net has address 72.52.91.14
php.net has IPv6 address 2a02:cb41::7
both work fine for me, https validates etc
[15:43]
mercutioyip php.net has that address for me too
but www.php.net has address 202.78.240.39
[15:43]
brycecwww.php.net has address 72.52.91.14
www.php.net has address 64.71.164.5
www.php.net has address 216.194.115.245
www.php.net has address 208.69.120.58
[15:43]
mercutioweird i only get one address for it
ahh if i query 4.2.2.2 i get what you get
if i query other nz servers i get that single address too, and it seems to go to nz
so yeh they're doing some weird geoip stuff
[15:44]
mnathani_what do folks think about https://www.reddit.com/r/sysadmin/comments/3ofth5/dell_buying_emc_for_67_billion/ [15:56]
RandalSchwartz"dude... you're getting bought by a DELL!" [15:57]
mjp_makes no difference.. [15:57]
brycec"That's a lot of money. I'd let someone buy me for $67 billion."
(is what I think)
[15:57]
mercutioi think there needs to be more competition in such spaces.
dell was already selling emc stuff a lot though
http://www.theregister.co.uk/2015/10/12/linux_networking_api_showing_its_age/
[16:00]
BryceBotTitle: "BBC bypasses Linux kernel to make streaming videos flow • The Register" [16:03]
mercutioshowing it's age is a weird way to put it
considering linux's network stack is probably the most current in the world
[16:04]
mjp_hehe, theres probably a good reason netflix doesnt use it [16:09]
mercutiothey're using netmap
i think
i don't think netflix has any particular reason to use freebsd over linux
[16:09]
mjp_they probably just flipped a coin [16:10]
brycec"This was selected for its balance of stability and features, a strong development community and staff expertise." Netflix on their choice of FreeBSD
https://lists.freebsd.org/pipermail/freebsd-stable/2012-June/068129.html
which can be interpreted as "We know FreeBSD, Linux's ecosystem is kinda shitty, and FreeBSD works very well."
[16:11]
mjp_im thinking its the TCP/IP stack. any *nix OS can run apache/nginx and mount in NFS storage [16:13]
mnathani_why doesnt chrome wrap long lines as in this post: https://lists.freebsd.org/pipermail/freebsd-stable/2012-June/068215.html [16:20]
mjp_<pre> [16:31]
.... (idle for 19mn)
mercutiolinux has a better tcp/ip stack than freebsd.
but stability wise freebsd is more conservative.
[16:50]
mjp_source? [16:59]
RandalSchwartzyeah - I'd think any BSD would have a better TCP/IP stack than Linux
since it has the *original* code as its core.
as I recall, freebsd was also the original reference implementation for ipv6
[17:03]
mercutioa lot of evolution has happende then
since then
i'm not sure of good online soruces
[17:04]
damn it's hard to google good information
some people say that freebsd has better tcp/ip stack because pf is better than iptables.
[17:13]
mjp_FreeBSD isnt good at a lot of things but the networking stack isnt one of them :) [17:14]
mercutiohmm freebsd has multiple network issues
like memory pool fragmentation when using large mtu's.
for low/light load normal situations linux will usually give faster transfer rates than freebsd.
for heavy load better testing would be needed :)
[17:14]
mjp_source? [17:15]
mnathani_how much does efficient device drivers for the NICS come into play? [17:15]
mercutioi don't think freebsd is that bad network wise.
just get two hosts one with freebsd and one with linux, do some testing
and you'll find the linux host giving better speeds.
mnathani_: not much for gigabit.
[17:15]
mjp_i have done that exact testing, and I got FreeBSD to outperform [17:16]
mercutiointeresting.
did you use cubic congestion control with freebsd?
[17:16]
mjp_2 exact hosts at OVH (canada) doing 100mb/1000mb file transfers to AU
net.inet.tcp.cc.algorithm=htcp
[17:16]
mercutiohmm
and what'd you use on linux?
did you try that new congestion control in freebsd btw?
[17:17]
mjp_these are all the options fyi: http://pastebin.com/mzizxY8q [17:18]
mercutioi found it went worse than cubic [17:18]
mjp_newreno? [17:18]
mercutionope
uhh
it was in like 9.2 or 9.3
[17:18]
mjp_out of the box freebsd didnt perform as well, but with tuning it was able to outperform. around 20% faster peak transfer speed [17:19]
mercutiohttps://www.freebsd.org/cgi/man.cgi?query=cc_chd [17:20]
mjp_also faster ramp-up with HTCP [17:20]
mercutiomaybe this was it
did you tune linux too?
[17:20]
mjp_no, the linux box was a friends [17:20]
mercutioahh
well linux probably should have been tuned too :)
[17:20]
mjp_to be fair, probably :) [17:21]
mercutioyou're at like 160 msec latency?
so if you want 100 megabit then you need pretty large window sizes
[17:21]
mjp_the box was 1Gbps [17:21]
mercutioin AU too? [17:21]
mjp_i dont have it anymore as i didnt use it [17:21]
mercutiohangon would be more than 160
dunno what i was thinking :)
more like 320.
so yeah you probably want at least 4megabyte window sizes
i think linux defaults to 2 megabyte
also ovh used to have bad peering
if it was before they expanded into canada
so there probably was loss
[17:22]
mjp_OVH is france isnt as good as canada, for AU people anyway [17:24]
mercutiois there a test dl somewhere?
it looks to be about 80 megabit to proof.ovh.net
from new zealand
and about 150 megabit to arp
one provider here has bad routing to ovh though
people were complaining because it was going via asia
[17:33]
.... (idle for 17mn)
mjp_yeah its slow [17:54]
mercutioyeh from what i've read about australian internet it seemed slow in general?
like most people get around 10 megabit?
[17:58]
...... (idle for 27mn)
RandalSchwartzit's slow to the rest of the world [18:25]
mercutiohttps://en.wikipedia.org/wiki/List_of_countries_by_Internet_connection_speeds
weird
[18:27]
BryceBotList of countries by Internet connection speeds :: This list of countries by Internet connection speed lists the Akamai State of the Internet Report "Average Connection Speed" (ACS) of TCP-level Internet access by end-users accessing content on the Akamai content delivery network. According to Akamai, ACS is not indicative of overall broadband connection speed because it is mitigated by several factors such as parallel web browser requests, small [18:27]
mercutiooh it's akamai
i was thinking those numbers looked funny
[18:27]
........... (idle for 50mn)
mjp_i have 100Mb/40Mb fibre at home and 10Gbps fibre at work, so not too slow :)
i can max out my fibre out home pulling data from the US without any problems
some areas have shitty speeds due to using ADSL on old phone lines or oversubscribed exchanges etc
[19:17]
mercutioyeah i heard that the exchange areas are huge there
oh and the oversubscription
then it's like $20/megabit or more for backhaul for fibre?
so probably will be bad too
err for nbn fibre
100/40 sounds good though
doesn't seem typical though
[19:27]
mjp_not sure about the backhaul costs
hopefully FTTP will be rolled out everywhere and FTTN will be canned
there is also quite a bit of fibre around. someone at work reckons it has been uncapped now and can get ~250Mbps down, faster than my fibre :/
[19:38]
.... (idle for 17mn)
mercutioEach 200 megabit CVC will cost 200 x $20 = $4000 per month (at wholesale, plus GST) to connect (for an effective rate of almost half a million dollars per month for an RSP connected to all 121 points of interconnect) [19:56]
mjp_is that still accurate? Thursday, July 21st, 2011 [20:00]
mercutioi haven't heard anything to the contrary
there was a big spiel somewhere about the ont stuff etc
new zealand is doing similar fibre stuff to australia
but we seem to be doing it slightly less bad.
(i still think it coudl be better)
[20:01]
mjp_I pay $100/month for 1TB of data which i dont think is too bad for fibre [20:02]
mercutioi use about 500gb/month i think
but i don't have cap
but yeah $100/month for 1tb data 100/40 seems ok
it was $109/month through iinet when i googled :)
i'm not sure what providers are good though
i just know whatever provider my friend had wasn't very good but was unlimited
[20:04]
mjp_looks like prices have risen to $119/month [20:09]
mercutiooh i was looking at 500gb
do you use iinet?
[20:09]
mjp_yep [20:09]
mercutioat least they peer
but ping seems on the high side
[20:10]
mjp_seems ok to me [20:17]
mercutioit's 240 msec from japan
and 160 from arp
it looked like
i dunno, is there a good sydney ip to ping on their network?
[20:17]
.... (idle for 17mn)
RandalSchwartz... http://www.cityofsydney.nsw.gov.au [20:34]
mercutiothat's not on iinet [20:35]
RandalSchwartzahh, no idea then [20:35]
mercutioit hasn't got wonderful routing either it seems [20:35]
milkinsfw.gov.au? [20:36]
mercutionsfw? :)
ahh bigpond.com.au
seems to be sydney, and have better routing
[20:36]
....... (idle for 32mn)
***tabthorpe has quit IRC (Read error: Connection reset by peer)
tabthorpe has joined #arpnetworks
[21:09]
......... (idle for 41mn)
toeshred__ is now known as toeshred [21:50]
.... (idle for 16mn)
RandalSchwartzyorkshire pudding day! [22:06]
***dj_goku has quit IRC (Read error: Connection reset by peer)
dj_goku has joined #arpnetworks
[22:15]

↑back Search ←Prev date Next date→ Show only urls(Click on time to select a line by its url)